2.0m Box Blade Sharpgrade Leveller (B79)

2.0m Box Blade Sharpgrade Leveller (B79)

Our Standard series shares the same sealed, shielded & lifetime lubricated QuadRod linkage as the Heavy Duty series. The mono beam chassis and close coupled wheels offer low ground pressure and exceptional visibility. Ideal for mid-frame skid steers in the 60 – 90HP bracket: residential pads, medium industrial flatwork, curb & gutter/sidewalk prep, equestrian surfaces.

  • Sealed, shielded, and lifetime lubricated QuadRod linkage; Never requires greasing.
  • Retracting front wheels: use as a dozer, buck piles, confined areas, while maintaining accuracy.
  • No centre pivot; 3 times faster to grade than conventional designs, no duck walking
  • Adjustable Hitch plate: sets chassis level on lower stops for precision grading
  • Mono-beam chassis with close-coupled wheels: low ground pressure with enhanced visibility

The SharpGrade Dual Grade Leveller enables you to accurately level to within 3mm (less than 1/10″). Using a SharpGrade Leveller is up to ten times faster than levelling using a skid steer with standard bucket attachment.

An optional system, such as a Leica Total Station or dual GNSS system allows you to easily grade complex contours with several gradients, diverging offset crown and different cambers directly from the control of the SharpGrade.

The SharpGrade Leveller enables you to accurately level, to within 2mm, large areas or small tight spaces with ease and efficiency. Fit with dual or single-axis laser levelling capability to ensure your levelling stays millimetre perfect over the whole job. Features such as knife-edge side shields and retracting wheel allow you to accurately trim right up to edges and get into tight corners. Large mirrors let you see exactly what’s happening on the whole front blade, eliminating blind spots.

Designed specifically to work on skid steer loaders, the SharpGrade Leveller works in forward and reverse for optimal efficiency. Twin pivoting blades give the ability to cut, carry, trim, spread and finish in one pass, in either direction, for speed and control. A curved mouldboard ensures wet material can be easily rolled. Operated from your machine’s hydraulic system, in-cab adjustments are a breeze and levelling is up to ten times faster than levelling using a skid steer and standard bucket attachment.

The SharpGrade Leveller is quick and easy to attach to your machine. No tools required, clip the unit into place and attach the hoses and you’re ready to start work. The handy front-mounted bucket carrier for ease of transport allows you to take both leveller and bucket to the job.

Designed and built with longevity in mind, the leveller features induction hardened pins, self-lubricated bushes and dirt seals in all moving joints, so it won’t let you down when time equals money. The patent-pending sealed QuadRod system keeps the blade rigid and accurate at all times, with low maintenance. Simple hydraulic valves with built-in relief protect the system from overload. Valves feature manual override capability to allow easy diagnosis if there is ever a problem.

  • QuadGrade or Leica iCON 2D system is highly accurate and easy to use, the blade can be manually operated by the 4 in 1 control at any time, with or without the laser control connected. Compatible with skid steers, small wheel loaders and mini excavators
  • Greased for life, low maintenance design. Induction hardened pins, permanently sealed, self-lubricated bushes and dirt seals in all moving joints provide a long low maintenance life.
  • Unique QuadRod Linkage. Patent-pending QuadRod system gives unparalleled rigidity, allowing use on 100+ HP machines. With only 4 arms, the outboard cylinders are directly connected to the outer edges of the blade, achieving the ultimate in accuracy. All joints are lifetime sealed, lubricated and maintenance-free, with no greasing required.
  • Retracting wheels: Offer the ultimate in compact grading, get up close to walls, curbs, foundations or use as a bulldozer, while providing the shortest transport length in class.
  • Adjustable hitch plate: Sets SharpGrade perfectly level with the boom fully down to provide the ultimate in rigidity. This reduces track and tire wear and boom, and linkage wear as the SharpGrade is pushing on the front of the machine instead of transferring the load to the rear of the machine through the linkages. This is especially important with vertical lift machines.
  • Twin parabolic mirrors: See the front blade and both front wingtips for confident grading in confined areas, along walls, curbs or foundations.
  • Graduated laser poles: Quick, easy set up of laser receivers with our built-in measuring tapes on our laser poles. Available in metric and imperial dimensioning, no tape measure required.

  • Scarifiers: Used for compacted surfaces, tungsten granule coated teeth protrude 50mm (2″) below blade height, scarify forwards, trail in reverse, pin-up when not in use or quickly remove
  • Removable laser poles: quickly change from long to short poles for indoor work or working in height-restricted areas. No tools required
  • Direct Connect: Connecting the SharpGrade to the base machine via the 14 pin plug on the boom, the operator can directly control the SharpGrade from the extra buttons on the handles. We have Direct Connect kits available for most brands, including Case, Cat, Deere, Kubota & Takeuchi.
  • QuadGrade or Leica MD40 adjustable grade height receivers: Electronically adjust the grade height 2mm (1/10″) at a time without leaving your seat. Increased receiver range means you stay on grade longer.
  • QuadGrade or Leica sonic system: Reads a string line, curb lip, or the ground for grades not possible to achieve with a laser. Plugs directly in and reads off the control panel. Height and slope are adjustable from cab.

2.0m Box Blade Sharpgrade Leveller (B79)

Shares the same sealed, shielded & lifetime lubricated QuadRod linkage as HD series. The mono beam chassis and close coupled wheels offer low ground pressure and exceptional visibility.

Description

Our Standard series shares the same sealed, shielded & lifetime lubricated QuadRod linkage as the Heavy Duty series. The mono beam chassis and close coupled wheels offer low ground pressure and exceptional visibility. Ideal for mid-frame skid steers in the 60 – 90HP bracket: residential pads, medium industrial flatwork, curb & gutter/sidewalk prep, equestrian surfaces.

  • Sealed, shielded, and lifetime lubricated QuadRod linkage; Never requires greasing.
  • Retracting front wheels: use as a dozer, buck piles, confined areas, while maintaining accuracy.
  • No centre pivot; 3 times faster to grade than conventional designs, no duck walking
  • Adjustable Hitch plate: sets chassis level on lower stops for precision grading
  • Mono-beam chassis with close-coupled wheels: low ground pressure with enhanced visibility

Reviews

There are no reviews yet.

Be the first to review “2.0m Box Blade Sharpgrade Leveller (B79)”

Your email address will not be published. Required fields are marked *

Laser Control Package STD
3D GPS or TPS Machine Control OPT
Blade Width 2.0m
Twin Blade System STD
Retracting Wheels STD
Machine Weight 780KG
Horsepower Range 60-90
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare